Tweet
The essence of the project in the following:
1-recorded history (2-3 days), 2-chased by the tester (half day), 3-put up on trades (2 days) total to double-triple the deposit you only need 1-2 week.
fears: profit closed, but the market stayed open orders with negative profit
exit 1: overstay minus and wait until the robot itself does not close them for profit (tested on own account is a maximum 1-2 of the week)
exit 2: close the what to eat with a minus, citing the fact that the total profit loss more
question: could your overstay minus?
answer: Yes, because two days of constant earnings
And all of this becomes possible only in the case of compliance with the rules that are specified in the test instructions or I'll give you a quote:
rule 1: leverage more 100
rule 2: digits after the point: any (tracer is updated - look to the end of this post)
rule 3: do not run other trades on the current account until the Origin expiration date (2 days)
rule 4: after the tester that "ORIGIN is ready", it will be necessary to run the tracer with the found parameters in the #PROFESSIONAL MODE=1 and only after 6-10 consecutive successful launches Tester, you can use ready Origin-files for trading on your account.
Note: If the 6-10 consecutive successful launches have failed to achieve, while in mode #PROFESSIONAL MODE = 1, mark the following variables step their future changes from minus, then specify the #PROFESSIONAL parameter MODE value 0 and wait until the tester finds profits by picking up the following parameters:
++MAXIMUM OF ORDERS, ++LOT SIZE IN PERCENT, _MG DEPTH, _TRAILING STOP, _TRAILING STOP FIRST, ++WAITING TIME IN SECONDS, ++TRAILING SPREAD, ++TRAILING PIPS [1...>], ++MIN TPS, ++MAX TPS, ++CRUSER LOT INCREASE, ++(PRC)CANDLE WAITING
Note: parameter ++ CRUSER LOT INCREASE this value can range from-0.01 to-0.5 on your discretion for the remaining options, other step value can vary from -1 to-200 at your discretion.
question: How do we know that everything happens the way it should?
answer: the "experts" tab after you exit the #PROFESSIONAL MODE you should see the message:
"additional instructions are found at the stage exit <#PROFESSIONAL> mode" - If so, then you must exit from tracer (software freak), i.e. Enter "-9999" in the variable "__refresh_now" and then restart the Tracer_SN.ex4 in the autocontinue mode, provided that the value "PROFESSIONAL MODE [0/1]=0" from file CONFIG_SN.txt (otherwise, it will be necessary to equate to zero before the next launch of the tester).
question: what will happen if you do not perform "software freak"?
answer: the tester will not be able to find a profit (I remember a similar case with the USDZAR currency)
question: what if the tester will not find anything anyway?
answer: get another currency because current (problematic) pair need time to update history for the next attempt (this is approximately 1-2 days).
Full Project you can download from here: h t t p s : / / t u s f i l e s . c o m /6zcnvpkf1qzi (link is renew! - fixed Tracer)
(please remove the "space" symbol from upper link)
Historical files (Currency.ASK, Currency.BID, Currency.DAT) for EURUSD and USDZAR (Liverage=200) to ensure that the trader was able to work out on Tester: h t t p s : / / t u s f i l e s . c o m /lonspth9eff2
(please remove the "space" symbol from upper link)
my Demo account: 2090270826
investor password: hrNMM2ffQ9
broker: h t t p s : / / t i c k m i l l . c o m
project cost: 100$
to buy this project, please contact E-Mail: Lucifernilsen@yahoo.com (in the subject line write: "ROBOT" or "DEMO")
Yes, completely forgot: make this option: "LOT SIZE IN PERCENT MIN [2.6.998]" more-it is in the file "CONFIG_SN.txt".
Tracer work also on 4-digits (by default variables may be changed):
h t t p s : / / t u s f i l e s . c o m /y7e0fpg6hx2y
MINIMAL LAG FOR GAP=5
MINIMAL LAG FOR STATIC GAP=7
1-recorded history (2-3 days), 2-chased by the tester (half day), 3-put up on trades (2 days) total to double-triple the deposit you only need 1-2 week.
fears: profit closed, but the market stayed open orders with negative profit
exit 1: overstay minus and wait until the robot itself does not close them for profit (tested on own account is a maximum 1-2 of the week)
exit 2: close the what to eat with a minus, citing the fact that the total profit loss more
question: could your overstay minus?
answer: Yes, because two days of constant earnings
And all of this becomes possible only in the case of compliance with the rules that are specified in the test instructions or I'll give you a quote:
rule 1: leverage more 100
rule 2: digits after the point: any (tracer is updated - look to the end of this post)
rule 3: do not run other trades on the current account until the Origin expiration date (2 days)
rule 4: after the tester that "ORIGIN is ready", it will be necessary to run the tracer with the found parameters in the #PROFESSIONAL MODE=1 and only after 6-10 consecutive successful launches Tester, you can use ready Origin-files for trading on your account.
Note: If the 6-10 consecutive successful launches have failed to achieve, while in mode #PROFESSIONAL MODE = 1, mark the following variables step their future changes from minus, then specify the #PROFESSIONAL parameter MODE value 0 and wait until the tester finds profits by picking up the following parameters:
++MAXIMUM OF ORDERS, ++LOT SIZE IN PERCENT, _MG DEPTH, _TRAILING STOP, _TRAILING STOP FIRST, ++WAITING TIME IN SECONDS, ++TRAILING SPREAD, ++TRAILING PIPS [1...>], ++MIN TPS, ++MAX TPS, ++CRUSER LOT INCREASE, ++(PRC)CANDLE WAITING
Note: parameter ++ CRUSER LOT INCREASE this value can range from-0.01 to-0.5 on your discretion for the remaining options, other step value can vary from -1 to-200 at your discretion.
question: How do we know that everything happens the way it should?
answer: the "experts" tab after you exit the #PROFESSIONAL MODE you should see the message:
"additional instructions are found at the stage exit <#PROFESSIONAL> mode" - If so, then you must exit from tracer (software freak), i.e. Enter "-9999" in the variable "__refresh_now" and then restart the Tracer_SN.ex4 in the autocontinue mode, provided that the value "PROFESSIONAL MODE [0/1]=0" from file CONFIG_SN.txt (otherwise, it will be necessary to equate to zero before the next launch of the tester).
question: what will happen if you do not perform "software freak"?
answer: the tester will not be able to find a profit (I remember a similar case with the USDZAR currency)
question: what if the tester will not find anything anyway?
answer: get another currency because current (problematic) pair need time to update history for the next attempt (this is approximately 1-2 days).
Full Project you can download from here: h t t p s : / / t u s f i l e s . c o m /6zcnvpkf1qzi (link is renew! - fixed Tracer)
(please remove the "space" symbol from upper link)
Historical files (Currency.ASK, Currency.BID, Currency.DAT) for EURUSD and USDZAR (Liverage=200) to ensure that the trader was able to work out on Tester: h t t p s : / / t u s f i l e s . c o m /lonspth9eff2
(please remove the "space" symbol from upper link)
my Demo account: 2090270826
investor password: hrNMM2ffQ9
broker: h t t p s : / / t i c k m i l l . c o m
project cost: 100$
to buy this project, please contact E-Mail: Lucifernilsen@yahoo.com (in the subject line write: "ROBOT" or "DEMO")
Yes, completely forgot: make this option: "LOT SIZE IN PERCENT MIN [2.6.998]" more-it is in the file "CONFIG_SN.txt".
Tracer work also on 4-digits (by default variables may be changed):
h t t p s : / / t u s f i l e s . c o m /y7e0fpg6hx2y
MINIMAL LAG FOR GAP=5
MINIMAL LAG FOR STATIC GAP=7
Comment